N1IV's Tower/Antenna Installation

A shot of the entire N1IV antenna setup and backyard.

   Antennas for the base are all mounted on a U.S. Towers TX-455 crank-up tower (55') with a Yaesu G-1000DXA Rotor. From the top of the tower moving upwards (in the picture below left), I run a Cushcraft A50-5S yagi for 6 Meters, then a a copy of K5OE's Texas Potato Masher using an M2 EB-144 and an EB-432 mounted on a PVC pipe stacking boom at a right angle to the yagis, then my howitzer - a 10 element Bencher Skyhawk Tri-band yagi. At the top, there's a Diamond X-500 for the VHF/UHF FM duties. Mounted off the side of the tower at about 30' and strung to three other supports, is a 280' Loop Skywire for 40, 80 and 160 meters. I'm working on getting a 1.2 Ghz yagi up there somehow... the IC-910 has the 23cm Module installed, so why not use it, right? Check out the pictures of the tower/antenna construction below.

Bottom to top - 6M, Potato masher, Skyhawk and X-500.

A Worms-eye view...

The N1IV Tower/Antenna Project

- BACK -

[The Shack] [Antennas] [Mobile] [EMCOM] [PR] [Home]